top of page

Training Program Support

Public·52 members

How to Upgrade Your AirLive WL-5460AP V2 with the Latest Firmware


How to Upgrade Your AirLive WL-5460AP V2 with the Latest Firmware




If you are looking for a way to improve the performance and security of your AirLive WL-5460AP V2 wireless device, you might want to consider upgrading it with the latest firmware. Firmware is the software that runs on your device and controls its functions and features. By updating it, you can enjoy new functions, fix bugs, and enhance compatibility with other devices.




Sa Airlive Wl 5460apv2 E19 Sa B5zip 18



In this article, we will show you how to download and install the SA firmware version E19 for your AirLive WL-5460AP V2. This firmware version has some advantages over the previous ones, such as:


  • It fixes the issue that the firmware cant be upgraded if the MAC address of the device is 004f81xxxxxx.



  • It adds a disable NAT function, which allows you to use your device as a bridge or repeater without affecting the network performance.



  • It adds a wireless client limit function, which allows you to set the maximum number of wireless clients that can connect to your device.



Before you start, make sure that you have the following requirements:


  • A computer with a web browser and an Ethernet cable.



  • An AirLive WL-5460AP V2 wireless device with a power adapter.



  • A stable internet connection.



Now, follow these steps to upgrade your firmware:


  • Download the SA firmware file from this link. The file name is WL-5460APv2_e19_SA_b5.zip. Save it to your computer and unzip it.



  • Connect your computer to your AirLive WL-5460AP V2 device using an Ethernet cable. Make sure that your device is powered on and working properly.



  • Open your web browser and type http://192.168.1.254 in the address bar. Press Enter. This will open the web interface of your device.



  • Enter admin as the username and password. Click Login.



  • Click on System Tools on the left menu. Then click on Firmware Upgrade.



  • Click on Browse and select the firmware file that you downloaded and unzipped in step 1. The file name is WL-5460APv2_e19_SA_b5.bin.



  • Click on Upgrade. Wait for a few minutes until the upgrade process is completed. Do not turn off or disconnect your device during this time.



  • After the upgrade is done, your device will reboot automatically. You can check the firmware version by logging in to the web interface again and clicking on Status on the left menu.



Congratulations! You have successfully upgraded your AirLive WL-5460AP V2 with the latest firmware. You can now enjoy the new features and improvements of your device.


How to Configure Your AirLive WL-5460AP V2 After Upgrading the Firmware




After you have upgraded your AirLive WL-5460AP V2 with the latest firmware, you might want to configure some settings to suit your needs and preferences. Here are some of the settings that you can change:


  • The operation mode: You can choose between AP, WDS, Universal Repeater, Bridge, and Client modes depending on how you want to use your device. For example, if you want to extend the wireless coverage of your existing network, you can use the Universal Repeater mode.



  • The wireless settings: You can change the wireless network name (SSID), channel, security mode, encryption type, and password for your device. You can also enable or disable the wireless client limit function and set the maximum number of clients that can connect to your device.



  • The network settings: You can change the IP address, subnet mask, gateway, and DNS server for your device. You can also enable or disable the DHCP server and NAT functions. If you disable NAT, you can use your device as a bridge or repeater without affecting the network performance.



  • The system settings: You can change the device name, password, time zone, and language for your device. You can also backup and restore your configuration settings, upgrade your firmware, reboot your device, and reset it to factory defaults.



To access these settings, you need to log in to the web interface of your device using your web browser. The default IP address is http://192.168.1.254 and the default username and password are admin. You can find more details about these settings in the user manual of your device.


How to Troubleshoot Your AirLive WL-5460AP V2 If You Encounter Any Problems




If you encounter any problems with your AirLive WL-5460AP V2 after upgrading the firmware, you can try some of these troubleshooting tips:


  • Check the power supply: Make sure that your device is connected to a power outlet and that the power adapter is working properly. If the power LED on your device is not lit or blinking, there might be a problem with the power supply.



  • Check the network connection: Make sure that your device is connected to your computer or router using an Ethernet cable and that the cable is not damaged or loose. If the LAN LED on your device is not lit or blinking, there might be a problem with the network connection.



  • Check the wireless connection: Make sure that your device is within the wireless range of your computer or router and that there are no obstacles or interference sources that might affect the signal quality. If the WLAN LED on your device is not lit or blinking, there might be a problem with the wireless connection.



  • Check the firmware version: Make sure that you have upgraded your device with the correct firmware version for your region and model. If you have downloaded and installed the wrong firmware version, you might experience some compatibility or performance issues.



  • Reset your device: If none of the above tips work, you can try resetting your device to factory defaults by pressing and holding the reset button on the back of your device for 10 seconds. This will erase all your configuration settings and restore them to their original values.



If you still have problems with your device after trying these tips, you can contact AirLive support for further assistance.


Conclusion




In this article, we have shown you how to upgrade your AirLive WL-5460AP V2 with the latest firmware, how to configure your device after upgrading the firmware, and how to troubleshoot your device if you encounter any problems. We hope that this article has been helpful and informative for you. By upgrading your firmware, you can enjoy the new features and improvements of your device and enhance its performance and security.


If you have any questions or feedback about this article or your device, please feel free to contact us. We would love to hear from you. Thank you for choosing AirLive as your wireless solution provider. b99f773239


https://www.1ststeplearningacademy.com/group/remote-learning-support/discussion/273a79b3-efb0-4326-8780-4bc7c6d1bbb1

https://www.greencastlenazarene.com/group/sunday-morning-worship-gathering-group/discussion/e68a8589-ad92-4653-9e03-8b4279f9e2a3

https://www.bcmhealthllc.com/group/programs-events/discussion/6d520176-daf0-46ca-8636-54a36ff0ad1f

About

Welcome to the group! You can connect with other members, ge...
bottom of page